DESCRIPTION
HPC®-HT is a two-part hybrid silicone/solvent resin (Part B is flammable) and (Part A is water-based resins) using specific ceramic compound loads for application directly over surface temps of 250°C (482°F) and up to 600°C (1112°F). It was designed to block and hold the interior temperature on the surface and reduce heat transfer loss to ambient.

After Part A and Part B are blended together, HPC®-HT Coating offers a ‘green’, nonflammable, non-toxic formula for high-heat surface applications. HPC®-HT is easily applied, and can be sprayed direct to metal, concrete and other high-temperature surfaces up to 600°C.

TYPICAL USES
1. As the high-temp insulation coat for surfaces greater than 250°C, over hot pipes, tanks, and valves
2. To hold heat on the surface of the pipe, valve, etc.
3. As a system to block conductive and convective heat transfer
4. Applied when a hot system cannot be shut down.